Sekoyen’s

I just knew from the awstat log that so many visitors searched for configuring Caremo  ADSL modem for TMNet Streamyx how to.

Ok, this is from the Caremo  ADSL modem manual (plus my configuration for TMNet Streamyx).

 CAREMO ADSL modem Router AS520

Quick Installation Guide

1. Local Internet Port (Web-browser)

Connect the Ethernet Port to your local area network(hub or switch) or directly to a PC (using the CAT5 RJ45 patch cable). Then launch the web browser and enter 192.168.1.1 to the web address box, press enter.

2. Login

You will see the Login interface (on the web browser) when you connect to the device through the Ethernet Port.

With the window active, type admin for both the Username and the Password and then click on the Apply button. (The default username and password is admin.)

3. Wizard

You can select the ISP services for each of the following protocols:

PPP over Ethernet (PPPoE) - Dynamic IP (What I am using)

PPP over ATM (PPPoA) - Static IP

RFC-1483 Bridge - modem only

The Username and Password fields are required.

Username: Enter your streamyx username e.g. myname@streamyx

Password: Enter your streamyx account password

Confirm Password: Enter the password again for confirmation.

VPI: enter 0

VCI: enter 35

Click on the Apply button to complete the configuration.

**** Permanently saved for Advance Setting

* Please note that configuration can only be permanently saved through the Maintenance interface, if configuration done by Advance Setting. ( You need to save the configuration!)

Click on the Advance Setting link to go to the Advance Setting page.

Click on Maintenance, click on Save All for permanently saved.

Click Restart.

Category: Hardware

This entry was posted on Thursday, May 25th, 2006 at 10:59 pm and is filed under Hardware. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.